18
5. Plug the cables from the handlebars into the
machine so the green stickers face up.
5
6. Open the handlebar levers (shown in
blue).
6
7. Twist the controls until they are comfortable
to hold and operate.
7
Tip: For micro-stippling, angle the
handlebars down toward the needle plate in
step 4, and leave the controls horizontal in
step 7.
4. Hold the handlebars at the desired angle
and tighten the cover screw.
4
Assembling the Handlebars (Continued)
Out-of-the-Box Assembly
8. Close the handlebar levers.
8
To Next Page
Loading...
