48
PREFERENCES
BASTE SMALL
STITCH/INCH 10
OVER SPEED ON
RIGHT HANDED
UNITS INCHES
DEFAULT CRUISE
Machine defaults can be customized in the Preferences menu. Access the Preferences menu by
choosing Tools from the Main Menu, and then selecting Preferences.
Here are a list of the options available for each setting:
• Default: This setting determines the quilting mode or menu the machine will use automatically
when powered up. The default can be set to: precise, cruise, baste, menu, or manual by
pressing select on the handlebar controls.
• Units: Use this setting to switch between inches and metric (centimeters).
• Baste: This setting will determine the preset stitch size for the baste quilting mode. It can be
set to small, medium, or large.
• Stitch/Inch: Determines the preset number of stitches per inch when using the regulated
precise or regulated cruise quilting mode. The SPI (stitches per inch) can range from 4 to 16.
If changed to centimeters using the Units setting above, this setting can range from 1.5 to 6.2
stitches per centimeter (SPC).
• Over Speed: Select to turn on or o the over-speed indicator in regulated precise or regulated
cruise quilting modes.
• Right-Handed or Left-Handed: This will reverse the buttons of the handlebar controls.
Choosing Machine Settings
Quilting
To Next Page
Loading...
Need help?
General
