17
Parts & Tools Needed:
Instructions
Take the following steps to install the machine handlebars:
Assembling the Handlebars
Handlebar Assembly
T-handle Allen
Wrench 4 mm
4 mm
2. Slide the handlebars into the slot so the
handlebar levers are face up.
2
3. Close the cover and loosely screw in the
cover screw.
3
Out-of-the-Box Assembly
The handlebar cover opens.
1. With the 4 mm Allen wrench, remove the
handlebar cover screw.
1
Handlebar Cover
Screw
Handlebar Cover
Handlebar
Levers
To Next Page
Loading...
