27
Winding a Bobbin
Parts & Tools Needed:
Bobbin (Class M)
For information on adjusting the
bobbin ll levels, see page 56.
Instructions
Your machine comes with two bobbins pre-wound with 50 weight cotton thread. An empty M-class
bobbin has also been provided. It’s important to choose bobbin thread that is similar in type and
quality as the top thread. For more information on choosing thread, see “Choosing Your Thread” on
page 82.
Note: This machine uses cone-style thread. Unless you have the spool accessory, please use only
thread cones for this machine.
The following diagram outlines the path (shown in blue) the thread must take to wind the bobbin.
1. Thread Stand
2. Guide Loops
3. Bobbin Thread Guide
4. Spring Hook
5. Bobbin Thread Tensioner
6. Bobbin Stand with Bobbin
1
2
3
4
5
6
Place an empty bobbin
onto bobbin stand
Preparing to Quilt
1
2
3
4
5
6