25
Turning the Machine On/O
Instructions
The power cable port and power switch are located on the back of the machine. To power on the
machine, take the following steps:
Power Cord
Parts & Tools Needed:
Power Cable
2. Plug the power cable into the machine.
2
3. Press the power cable retainer down rmly
until it grasps the power cable.
3
1. Lift up the power cable retainer.
1
Power Cable
Retainer
4. Press the right side of the power switch to
turn the machine on.
4
Power
Switch
Out-of-the-Box Assembly
To Next Page
Loading...
Need help?
General
