3. Navigate to Display, and then press “Select” (left softkey ).
4. Set desired time in seconds for Backlight timeout and for Menu timeout. Available value: 15
seconds, 30 seconds, 60 seconds or disabled. (Default is 30 seconds)
5. Press Save (left softkey ) to save and apply the new settings.
Return to Idle Screen
Press the Power Key to quickly exit the menu and return back to the main idle screen.
If you do not press any key in a period of time, the LCD screen will automatically exit the menu and return to
the idle screen as well.
When you are navigating on the handset’s menu, and you receive an incoming call, the LCD screen will
automatically exit the menu and you can either accept or reject the call, when the call is terminated, the LCD
screen will return back to the idle screen.
Register a SIP Account
DP750 supports up to 10 SIP accounts, 5 handsets. Each handset can be configured up to 10 accounts.
Please be aware that line settings will be affected by DID settings (hunting group settings) in “DECT SIP
Account Settings”. For more details about “Hunting Group”, please refer to “Administration Guide”.
Register account via web user interface
1. Access your DP750 base station web UI by entering its IP address in your favorite browser.
2. Enter your admin’s username and password (default username and password: admin/admin).
3. Press Login to access your settings.
4. Go to Profiles tab and select a profile to use.
DP750 supports up to 4 profiles. A profile is a set of settings including general settings, network settings,
SIP setting, audio setting, call settings and ring tones, and etc.
A profile can be used with different SIP accounts.
5. In General Settings, set the following:
a. Profile Active to Yes.
b. SIP Server field with your SIP server IP address or FQDN.
c. Failover SIP Server with your failover SIP server IP address or FQDN. Leave empty if not
available.
To Next Page
Loading...
Need help?
General
