Grandstream Networks DP720 User Manual

P a g e | 25
DP750/DP720 User Guide
DP720 Handset Menu
The handset has an easy-to-use menu structure. Every menu opens a list of options. To open the main menu,
press “Menu” (left softkey) when the handset is on and in standby mode. Press Arrow keys to navigate to the
menu option you require. Then press “Select” (left softkey) or OK/Selection key to access further options or
confirm the setting displayed. To go to the previous menu item, press “Back” (right softkey). You can press
Power key at any time to cancel and return to standby mode. If you do not press any key, the handset
automatically reverts to standby mode after 20 seconds.
Figure 8: DP720 Menu Structure
Contacts
Call History
Voice Mail
Settings
Call Settings
Status
Missed Calls
Accepted Calls
Outgoing Calls
All calls
Play Message
Set Voice Mail
Do Not Disturb
Call Waiting
Call Forward
Speed Dial
Outgoing Default Line
Lines
Registration
Handset Name
Phone Language
Date / Time
Audio
Display
Network Settings
Sip Settings
System Settings
User Settings
Firmware Upgrade
Factory Functions
Time
Date
Register
Deregister
Select Base
Advisory Tone
Ringtones
Volume
Diagnostic Mode
Audio Loopback
LCD ON /OFF
LCD Diagnostic
System Monitoring
Model(RF)
Firmware(BS)(HS)
IP Address
Subnet Mask
Gateway
MAC Address
IPEI
Change Base PIN
Factory Reset
Reboot Base
Repeater Mode
Private
Shared
LCD Timeout
Menu Timeout
Message Waiting
LCD Brightness
IP Settings

Grandstream Networks DP720 Specifications

General

Brand	Grandstream Networks
Model	DP720
Category	IP Phone
Language	English