3. Press Dial key , # (Use # as dial key” must be configured in web configuration) or wait for 4
seconds and the call will be initiated automatically.
4. To terminate the call, press Hang-Up key .
During the call, you can switch the call mode by pressing the corresponding keys and cancel the dialing
operation by pressing the on-hook key. During the call conversations, you can press the left and right
navigation keys to adjust the volume. The call duration is displayed on the LCD screen while the call is in
progress and call summary will be displayed once the call is terminated.
Notes: - To dial “+” please keep pressing “0” key for about 2 seconds.
- To dial from contacts list, choose a contact using navigation keys and press Dial key .
Dialing from Call history
Users may use their call history entries to initiate calls.
1. Press Menu (left softkey or the selection key ) to bring up operation menu.
2. Use arrow keys to reach Call History Icon and then press “Select” (left softkey ).
3. Select the desired entry, then press Dial key to establish the call.
Note: In step 3, users can press “Options” softkey followed by “Edit Dial” option to initiate the call.
The call history list stores the last dialed phone numbers. When the memory of the redial number list is full,
the handset will automatically erase the oldest dialed number when a new number is dialed
Dialing from Phonebook
Users may use their private or shared contacts to initiate calls.
1. Press Contacts (right softkey ) to access phonebook menu.
2. Select Private or Shared phonebook.
3. Select the contact to call.
4. Press Dial Key to initiate the call.
Note: In step 3, users can press “Options” softkey followed by “Edit Dial” option to initiate the call.
To Next Page
Loading...
Need help?
General
