● Set Key 1:Configure Key 1 as VM speed dial for selected
account.
Preferences
● Outgoing Default Line:Select account to be use by default for
outgoing calls.
● Auto Answer:Enable/Disable Auto Answer. (Default is Disabled).
● Off-Cradle Pickup:Enable/Disable Off-Cradle Pickup. If enabled,
users can answer the calls by picking up the handset off-cradle.
(Default is Disabled).
● On-Cradle Hangup: Enable/Disable On-Cradle Hangup. If enabled,
users can end the call by placing the handset on-cradle. (Default
is Disabled).
● Mute as DND:Enable/Disable Mute as DND. If enabled, pressing
mute key on idle state will set the phone to DND mode. (Default
is Enabled)
● Disable Busy Tone:Enable/Disable Busy Tone. If set to enabled,
busy tone will not be played. (Default is Disabled).
● Disable CW Tone:Enable/Disable CW Tone. If set to enabled, Call
Waiting Tone will not be played. (Default is Disabled).
● Onhook Backlight:Enable/Disable Onhook Backlight. If enabled,
pressing "Hangup" key on idle screen will switch off LCD screen.
(Default is Disabled)
● Cradle Backlight:Enable/Disable/Dim Cradle Backlight. If
enabled, LCD will remain backlit when the handset is placed on-
cradle/charging. If set to “Dim”, LCD brightness will be reduced
when the handset is placed on-cradle/charging. (Default is
Disabled)
● SIP Account Display:Select which SIP Account information will
be displayed on the screen.
● Name Only:Display SIP Account Name only. (Default)
● ID Only:Display SIP User ID only.
● None:No account information will be displayed.
● PTT (Push To Talk):Enable/Disable Push To Talk. If set to
enabled, pressing and hold PTT hard/soft key, a PTT call will be
initiated. Pressing the PTT hard/soft key, it will redirect you to
the setting to enable or disable it. (Default is Disabled)
Customizing
keys functions
Customizing keys functions:
● L: Configure Left Softkey function in idle. Function can be set as
Menu, History, Contacts, Line or PTT. Default is Menu.
● R: Configure Right Softkey function. Function can be set as
History, Contacts, Line or PTT Default is Contacts.
● ⯅: Configure Arrow UP Key function. Default is Outgoing Calls
(Call History).
● ⯆: Configure Arrow DOWN key function. Default is Accepted
Calls (Call History).
● ⯇: Configure Arrow LEFT key function. Default is Ringer Volume
Down.
● ⯈ :Configure Arrow RIGHT key function. Default is Ringer
Volume Up.
Select key and press OK button to configure function. Following
functions are available for arrow keys: 1. Disabled, 2. Missed Calls,
3: Accepted Calls, 4: Outgoing Calls, 5: History, 6: Contacts, 7:
Status, 8: Line, 9: Voice Mail, 10: Ringer Volume Up, 11: Ringer
Volume Down, 12: Audio Volume Up, 13: Audio Volume Down, 14:
Intercom.
● Speed Dial:Assign contact numbers as speed dial.
Select a key [2], [3], [4], [5], [6], [7], [8] or [9] and press OK button.
Select “Edit” to manually specify the destination number or select
“From Contacts” to select a contact as speed dial destination.
To Next Page
Loading...
Need help?
General
