Grandstream Networks GWN7600 User Manual

P a g e | 49
GWN7610/GWN7600/GWN7600LR User Manual
Version 1.0.8.18
Client Bridge
The Client Bridge feature allows an access point to be configured as a client for bridging wired only clients
wirelessly to the network. When an access point is configured in this way, it will share the WiFi connection
to the LAN ports transparently. This is not to be confused with a mesh setup. The client will not accept
wireless clients in this mode.
Once a SSID has the Client Bridge Support enabled, the AP adopted in this SSID can be turned in to
Bridge Client mode by click the Bridge button .
Please be noted that once an AP it turned into Client Bridge mode, it cannot be controlled by a Master
anymore, and a factory reset is required to turn it back into normal AP mode.
Figure 31: Client Bridge
Important Notes :
 The access point that will be operating on bridge mode, must be set with a fixed IP address before
activating the bridge mode on the access point.
 Users must enable client bridge support option under SSID or SSID WiFi settings in order to have
it fully functional. See [Client Bridge Support]

Grandstream Networks GWN7600 Specifications

General

Brand	Grandstream Networks
Model	GWN7600
Category	Wireless Access Point
Language	English