P a g e | 80
GWN7610/GWN7600/GWN7600LR User Manual
Version 1.0.8.18
SYSTEM SETTINGS
Maintenance
Users can access Maintenance page from GWN7610/GWN7600/GWN7600LR WebGUISystem
Settings Maintenance.
Basic
Basic page allows Country and Time configuration.
Table 18: Basic
Enables Web HTTP Access. By default, it’s disabled.
Specifies HTTPS port. By default, is 443.
Select the country from the drop-down list. This can affect the number of
channels depending on the country standards.
Configure whether to enable/disable 5.150-5.350GHz (channels 36-64) for
outdoor usage in order to follow some countries regulations.
Note:
This option is only available for certain countries and only effective for
outdoor type of access points (GWN7600LR only).
Configure time zone for the GWN7610/GWN7600/GWN7600LR.
Make sure to reboot the device to take effect.
Configure the IP address or URL of the NTP server. The device will obtain
the date and time from the configured server.
Change the Date Display Format, three options are possible YYYY/MM/DD,
MM/DD/YYYY and DD/MM/YYYY.
Select the time schedule when AP will be rebooted.
Refer to [SCHEDULE] to define time.
To Next Page
Loading...
Need help?
General
