P a g e | 68
GWN7610/GWN7600/GWN7600LR User Manual
Version 1.0.8.18
Accounting Update
Interval
Enter Update Interval for RADIUS Accounting Server. The interval unit can be
set by seconds, minutes, hours or days.
Enter RADIUS NAS ID.
This field appears only when Platform is set to “Linkyfi Platform”.
Specify URL where to redirect clients after authentication.
In case social media authentication is used, the user needs to allow some traffic between the AP and
social medial platforms (Facebook API as example) to send authentication credentials and receive reply,
this traffic can be allowed using the Authentication rules which are explained below.
Figure 47: Authentication rules
Pre-Authentication Rules
Using this option, users can set rules to match traffic that will be allowed for connected WiFi users before
authentication process. This can be needed for example to setup Facebook authentication where some
traffic should be allowed to Facebook server(s) to process the user’s authentication. Or simply to be used
to allow some type of traffic for unauthenticated users.
Post-Authentication Rules
On the other hand, post authentication rules are used to match traffic that will be banned for WiFi clients
after authentication. As an example, if you want to disallow connected WiFi clients to issue Telnet or SSH
traffic after authentication then you can set post authentication rules to match that traffic and once a
connected client passes the authentication process they will be banned from issuing telnet and SSH
connections.
To Next Page
Loading...
