Use the Web GUI
Access Web GUI
The GWN7610 embedded Web server responds to HTTPS GET/POST requests. Embedded HTML pages
allow users to configure the device through a Web browser such as Microsoft IE, Mozilla Firefox, Google
Chrome etc.
Figure 12: GWN7610 Web GUI Login Page
To access the Web GUI:
1. Make sure to use a computer connected to the same local network as the GWN7610.
2. Ensure the device is properly powered up.
3. Open a Web browser on the computer and type in the URL using the MAC address as shown in
Discover the GWN7610 or the IP address using the following format:
https://IP_Address
4. Enter the administrator’s login and password to access the Web Configuration Menu. The default
administrator's username and password are "admin" and "admin".
Note: At first boot or after factory reset, users will be asked to change the default administrator password
before accessing GWN7610 Web interface.
The new password field is case sensitive with a maximum length of 32 characters. Using strong password
including letters, digits and special characters is recommended for better security.
To Next Page
Loading...
