Schedule
Users can use the schedule configuration menu to set specific schedule for GWN features (bandwidth rules,
access control), while giving the flexibility to specify the date and time to turn On/Off the selected feature.
In order to configure a new schedule, follow below steps:
1. Navigate to “System Settings Schedule”.
2. Press to add new schedule.
3. Enable the schedule and select associated feature (bandwidth rule or client access).
4. Specify the date and time along with months and days to enable ON and Off the feature.
5. Press save and apply the changes.
After the configuration done, the GWN will check regularly the date and time in order to decide whether to
activate or deactivate the associated feature with the schedule.
The figure on next page shows a sample configuration that enabled bandwidth rule limitation during office
working hours for WiFi users:
Figure 56: Schedule Sample
To Next Page
Loading...
Need help?
General
