Figure 38: Managing the Global Blacklist
A second option, is to add custom access lists that will be used as matching mechanism for MAC address
filtering option under network groups and SSIDs to allow (whitelist) or disallow (blacklist) clients access to
the WiFi network.
Click on in order to create new access list, then fill it with all MAC addresses to be matched.
Once this is done, this access list can be used under network group or SSID WiFi settings to filter clients
either using whitelist or blacklist mode.
Figure 39: Blacklist Access List
Note: Users could set also a schedule on which the access list will be taken into consideration, please
check more details under [Schedule] section.
Time Policy
The timed client disconnect feature allows the system administrator to set a fixed time for which clients
should be allowed to connect to the access point, after which the client will no longer be allowed to connect
for a user configurable cool-down period.
The configuration is based on a policy where the administrator can set the amount of time for which clients
are allowed to connect to the WiFi and reconnect type and value after which they will be allowed to connect
back after they have been disconnected.
To Next Page
Loading...
