Grandstream Networks GWN7610 User Manual

P a g e | 62
GWN7610 User Manual
Version 1.0.5.15
Reboot
Click on Reboot button to reboot the device
Download Configuration
Click on Download to download the device’s configuration file.
Upload Configuration
Click on Upload a device’s configuration file.
Upgrade Now
Click on Upgrade, to launch firmware/config file provisioning. Please make
sure to Save and Apply changes before clicking on Upgrade.
Factory Reset
Click on Reset to restore the GWN7610 to factory default settings
Access
The Access Web page provides configuration for admin and user password.
Table 15: Access
Field
Description
Current Administrator
Password
Enter the current administrator password
New Administrator
Password
Change the current password. This field is case sensitive with a maximum
length of 32 characters.
Confirm New
Administrator Password
Enter the new administrator password one more time to confirm.
User Password
Configure the password for user-level Web GUI access. This field is case
sensitive with a maximum length of 32 characters.
User Password
Confirmation
Enter the new User password again to confirm.
Syslog
The syslog Web page provides configuration settings for syslog.
Table 16: Syslog
Field
Description
Syslog Server
Enter the IP address or URL of Syslog server.
Syslog Level
Select the level of Syslog, 5 levels are available: None, Debug, Info,
Warning and Error. Please reboot the GWN7610 to take effect.
Logserver
The logserver page allows the user to configure syslog server on GWN7610 in order to save log messages
on connected external USB drive.
First connect a USB drive to the Access point, then configure the parameters and make sure to start the
server in order to collect messages from devices sending syslog to GWN. Following table gives description
for configuration parameters of GWN Logserver:

Grandstream Networks GWN7610 Specifications

General

Brand	Grandstream Networks
Model	GWN7610
Category	Wireless Access Point
Language	English