Grandstream Networks GWN7610 User Manual

P a g e | 65
GWN7610 User Manual
Version 1.0.5.15
File Size
Set a File size that the capture will not exceed (Optional field)
Rotate Count
Set a value for rotating captures (Optional Field)
Direction
Choose if you want to get all traffic or only outgoing or incoming to the choses
interface.
Source Port
Set the Source Port to filter capture traffic coming from the defined source port.
Destination Port
Set the Destination Port to filter capture traffic coming from the defined port.
Source IP
Set the Source IP to filter capture traffic coming from the defined source IP.
Destination IP
Set the Destination IP to filter capture traffic coming from the defined destination
IP.
Protocol
Choose ALL or a specific protocol to capture (IP, ARP, TCP, UDP, ICMP, IPv6)
Core Files
The Core Files Web page displays core dumps generated when the GWN7610 crash, this is helpful for
troubleshooting purposes, if any core dump found on this page please help to contact our support team for
further investigation using following link: https://helpdesk.grandstream.com/
Ping/Traceroute
Ping and Traceroute are useful debugging tools to verify reachability with other clients across the network.
The GWN7610 offers both Ping and Traceroute tools for IPv4 and IPv6 protocols. To use these tools, go to
GWN7610 WebGUISystem SettingsDebug and click on Ping/Traceroute.
Figure 53: IP Ping
• Next to Tool choose from the dropdown menu: - IPv4 Ping for an IPv4 Ping test to Target
- IPv6 Ping for an IPv6 Ping test to Target
- IPv4 Traceroute for an IPv4 Traceroute to Target
- IPv6 Traceroute for an IPv6 Traceroute to Target

Grandstream Networks GWN7610 Specifications

General

Brand	Grandstream Networks
Model	GWN7610
Category	Wireless Access Point
Language	English