For languages that support letters with accents, the handset now supports typing letters with accents on modes “AB3”,
“abc”, and “ABC”.
Numeric Keys Configuration:
Users can also leverage the numeric keys and assign them different functions by directly pressing the key for 3 seconds and
selecting the Mode and Value. The supported modes are : Speed Dial, Speed Dial via Active Account, Dial DTMF, Call
Voicemail, Call Return, LDAP Search, History, INFO, Messages, DND, Redial, Open Door, Provision, HTTP Command, Send
Message.
Below is an example of configuring the Number 2 key for Speed Dialing the extension 4006.
Numeric Key Configuration on WP8x6
WEB GUI ACCESS CONFIGURATION
The WP8x6 can be configured using:
The embedded Web GUI on the handset via PC’s web browser.
LCD Configuration Menu using the WP8x6 keypad.
Configuration via Web Browser
The WP8x6 embedded Web server responds to HTTP/HTTPS GET/POST requests. Embedded HTML pages allow a user to
configure the handset through a Web browser such as Google Chrome, or Mozilla Firefox.
Accessing the Web UI
1. Connect the computer to the same network as WP8x6.
2. Make sure the handset is booted up and powered correctly.
3. You may check the IP address on the phone LCD menu Status 🡪 Network Status.
4. Open the Web browser on your computer and enter the WP8x6 IP address in the address bar of the browser.
5. Enter the administrator’s username and password to access the Web Configuration Menu.
Note
From the Web GUI, you can configure all the functions supported by the WP8x6; while via keypad menu, you can access limited
configuration.
Note
Please note that Microsoft’s IE 9 and below are not supported, also the records from the web cannot be played with IE10, Edge,
and Safari. We highly recommend using Google Chrome or Mozilla Firefox.
Note
The computer must be connected to the same sub-network as the phone. This can be easily done by connecting the
computer to the same hub or switch as the phone.
To Next Page
Loading...
