6. Press Save and Apply to save your configuration.
After applying your configuration, your phone will register to your SIP Server. You can verify if your device has registered with
your SIP server from its web interface under Status 🡪 Account Status (“Registered” with green color when the account is
correctly registered, or “Unregistered” with red when the account is not properly registered)
Register Account via LCD Menu
To register your SIP account via the LCD menu, please refer to the following steps:
1. Unlock your handset and press Menu to bring up the operation menu.
2. Use the arrow keys to reach Settings and then select the Account Settings tab.
3. Select which account you want to configure and then set the following:
Enable Account to “Enable”.
Account Name: Any name to identify this specific user.
SIP Server field with your SIP server IP address or FQDN.
SIP User ID: User account information, provided by VoIP service provider (ITSP). Usually in the form of a digit similar
to a phone number or actually a phone number.
SIP Authenticate ID: SIP service subscriber authenticate ID used for authentication. Can be identical to or different
from the SIP User ID.
SIP Authentication Password: SIP service subscriber’s account password to register to the SIP server of ITSP. For
security reasons, the password field will be shown as ******.
Voicemail Access Number: The voicemail number of your account.
Display Name: The name that will be used for the caller ID name in SIP INVITE.
Account Ringtone: Choose the preferred ringtone for this account.
Press the “OK” softkey to apply the configuration
To Next Page
Loading...
