Reboot
CALL OPERATIONS
Placing calls
To place calls, you can use the following mode:
Earpiece mode: Press the off-hook / dial key to dial out.
Speakerphone mode: Press the speakerphone key to dial out.
Headset mode: Press the off-hook / dial key to dial out using a connected headset, from either a 3.5mm headset jack or
a Bluetooth-connected headset.
During the call, you can switch the call mode by pressing the corresponding keys or connecting a headset.
Make a Call using a Line
Making calls requires the use of SIP lines. So, you should first register the SIP account to the handset beforehand, after
registering the sip lines, you can choose between them while trying to make calls by pressing the “Accounts” button
displayed on the call screen. Please refer to the following methods to make calls using a line:
1. Enter the desired number using the keypad.
2. Toggle between the available lines by pressing the “Account” button to choose the line for making calls. (The account
name will change on the screen when press the “Account” button).
3. Press Dial key , # (Use # as dial key” must be configured in web configuration) to initiate the call.
Note: Users can also initiate calls with hands-free mode using the Speaker key .
4. To terminate the call, press the Hang-Up key .
Notes:
To dial from the contacts list, choose a contact using the navigation keys and press the Dial key .
When having unread voicemails on the handset, once accessing the dialing interface a stutter tone will be heard to notify
users about voicemails that need to be read.
The maximum length of dialed digits is limited to 64 characters.
Dialing from Call history
Users may use their call history entries to initiate calls. Please refer to the following steps:
1. Press Menu to bring up the operation menu.
2. Use arrow keys to reach Call History.
3. Select the desired entry and press the “Call” soft key to establish the call.
Dialing from Call History
To Next Page
Loading...
