Setting up the Phone
Charging Station
Plug the power adapter into a power source socket to start using the charging station.
Charging Station
Handset
Please refer to the following steps to setup your WP8x6 phone:
1. Open the battery cover from the opening port. Remove the battery door for WP836.
2. Insert the battery with the electrodes in the top right corner for WP816, and top left corner for WP826/WP836.
3. Close the battery cover, after inserting the battery door for WP836.
WP816 Handset Setup
WP826 Handset Setup
Check the package before installation. If you find anything missing, contact your system administrator.
Note
Please charge the battery fully before using the handset for the first time. (For more information about the battery, please refer
to Battery Information.
To Next Page
Loading...
