The warning and alarm each have a distinct tone which can be configured under Settings→Advanced Settings→Alarm
Settings.
Alarm and Warning Tone
Snooze Timeout
When an alarm or warning is triggered, users can snooze the alert, preventing alarm monitoring for the Snooze Timeout
duration (0 to 300 seconds). Users can also pause the snooze window to temporarily enable alarm detection.
The snooze flow is explained using the following image:
Snooze Timeout Configuration
Emergency Call
Users can configure the WP8x6 to dial a specific number when an alarm is triggered. By setting this number, users can ensure
that the contacted party is quickly notified, improving response times during emergencies.
1. Quickly press the side key to access the alarm settings (if the side key is configured as “alarm”), or go to
Settings→Advanced Settings→Alarm Settings.
2. Enable the Emergency Call feature and choose the account to be used for making the call.
3. Enter the emergency number under Emergency Dial Number.
To Next Page
Loading...
