Group Paging Parameters
Paging function: Enable or disable the Group paging function.
Default group: The group is used to transmit an outgoing page if the user does not explicitly specify a group.
Priority group: The group assigned for priority pages.
Emergency group: The group assigned for emergency pages.
Accept while busy: If no, incoming Group paging sessions do not produce standard call waiting. If yes, incoming PTT
sessions produce standard call-waiting behavior on the active audio group.
Caller ID(*): Caller ID number for identification.
P-Time: The audio payload size in milliseconds.
Audio codec: The audio codec to use for outgoing Group paging broadcasts. Incoming Group paging audio will be
decoded according to the codec specified in the incoming message.
Group: Set the group whether to be available, transmit, subscribe, join a group, and the group name.
IGMP Settings
Users could specify how often the phone will report IGMP when the PTT/ Paging function is turned on. IGMP reporter help to
keep PTT/ Paging receivable in a dormant state. The interval may have some effect on standby time. The valid range is 20-120
seconds
You can find these settings on the LCD Menu under Settings → Advanced Settings → PTT/Paging → IGMP Keep Alive (s)
IGMP Settings
ALARM SETTINGS
The WP8x6 series is equipped with multiple alarm settings designed to ensure safety in various scenarios. These alarms
include:
Push-button alarm.
Ambient sound alarm.
No movement alarm.
Man down alarm.
Running alarm.
This section describes in detail each of the alarm functions as well as the necessary configuration steps.
Push-button Alarm
The push-button alarm allows the user to manually trigger an emergency alert in case of a situation that requires immediate
attention.
To Next Page
Loading...
