Connecting to Bluetooth
Connecting to Wi-Fi Network
Auto Connection
Go under the web interface of the “Network Settings 🡺 Wi-Fi Settings”.
For example, the user can pre-configure the WP8x6 to automatically connect to the Wi-Fi network at the client site, making it
easier for the client to use the phone without going through setting up manually the Wi-Fi network. Also, the client could
have the SSID show as “not in range by default”, until the SSID is created on your access point and configured to have the
following password “wp!987@dmin“. Then the phone will automatically connect to that SSID.
WP_master not in range
Manual connection
The WP8x6 supports dual-band 802.11a/b/g/n/ac Wi-Fi, please refer to the following steps to connect to the Wi-Fi networks:
1. On the LCD menu, press the Menu key and navigate to Settings → Wi-Fi Settings.
2. Navigate to “Wi-Fi Networks”. A list of Wi-Fi networks will be displayed.
3. Select the desired network to connect to. (Enter the correct password to connect if requested)
The handset will display a Wi-Fi icon on the main LCD menu if the con nection to the Wi-Fi network is successful.
Note
For easy deployment, WP8x6 out of the box is preconfigured to connect to a default SSID named wp_master with a password
(WPA/WPA2 PSK) equal to wp!987@dmin, users can adapt these settings from the web UI as well to make it easier for
deployment on customer site.
To Next Page
Loading...
