WP8x6 Call Features
QUICK ACCESS SETTINGS
Quick access is a shortcut feature that allows WP8x6 users to launch phone applications, perform call actions, or display device
information, with one click.
The quick access modes supported are : “Quick Start” and “Quick Open” , Depending on the quick access mode,
Quick Start: Allows users to configure call feature shortcuts such as : Speed Dial, Dial DTMF, DND….
Quick Open: Allows users to open specific phone application, such as: Broadsoft Call Log, Contacts, Local Phonebook, LDAP
To add a quick access key, Please follow the below steps on your WP8x6 phone:
1. Click on the mute/shortcut key
2. Click on “Config” to set up the quick access key
3. Choose the quick access mode, function, and its corresponding parameters
4. The Quick access key will be saved, and can be triggered by clicking the number corresponding to the key, in our case, we
will press key number1
PTT (PUSH-TO-TALK) FUNCTIONALITY
The WP8x6 supports the push-to-talk (PTT) features which is a technology based on the instantaneous communication
commonly employed in wireless cellular phone services using a button to switch the device from voice transmission mode to
voice reception mode. This feature is similar to “walkie-talkie” use and the PTT mode switches a phone from full duplex mode,
where both parties can hear each other simultaneously, to half duplex mode, where only one party can speak at one time.
Multiple parties to the conversation may also be included.
Enabling PTT mode
You can enable and configure the PTT settings using the handset LCD menu:
1. Press Menu to bring up the operation menu.
2. Use arrow keys to reach Settings 🡪 Advanced settings 🡪 PTT and paging.
3. Choose PTT settings and enable the PTT function.
*92
No Answer Call Forward. To set up delayed call forward:
Dial *92 and then enter the number to forward the call.
Press Call softkey or Dial key.
*93
Cancel No Answer Call Forward. To cancel the delayed call forward:
Dial *93.
Press Call softkey or Dial key.
To Next Page
Loading...
