CPE Status Table
Battery Status
This option is used to display information about the battery of the phone, to view the battery status, please follow the below
steps:
1. Press the Menu key to bring up the operation menu.
2. Use arrow keys to reach the Status menu and navigate to Battery Status.
Battery Status
The following information will be displayed:
Battery Status Description
Configuring the Appearance Settings
Some of the important parameters that can be defined for the phone’s appearance are: the screen brightness, the LCD
Timeout, and the keypad backlight, we can configure them as follows
1. Press Menu to bring up the operation menu.
2. Use the arrow keys to reach Settings.
3. Navigate to Basic Settings, and then Appearance.
4. Configures the LCD brightness, key backlight, lock screen, screen time out, and font size.
5. Press “Back” (right softkey) to save and apply the new settings.
TCP CR
Indicates the status of control and reporting mechanisms related to TCP (Transmission Control
Protocol) traffic on the Customer Premises Equipment.
Item Description
Electricity Displays the battery percentage left
Remaining Usage Time Displays the estimated remaining usage time of the phone
Battery Temp Displays the battery temperature
Battery Health Displays the battery health
Charge count
Refers to the number of charge cycles completed by the battery, indicating its usage history and
potentially its remaining lifespan.
To Next Page
Loading...
