LCD Display Configuration
Return to Idle Screen
Press the Power Key to quickly exit the menu and return to the previous page
When you are navigating on the handset’s menu, and you receive an incoming call, the LCD screen will automatically exit the
menu and you can either accept or reject the call, when the call is terminated, the LCD screen will return to the idle screen.
Register a SIP Account
The WP8x6 supports up to 2 SIP accounts for the WP816, and 3 SIP accounts for the WP826 and WP836, they can be
configured either using the web GUI or via the keypad menu as described in the following section.
Register Account via Web User Interface
1. Access your handset base station web UI by entering its IP address in your favorite browser.
2. Enter your admin’s username and password (default username and password: admin/ Random Password from the sticker
on the back of the unit).
3. Press Login to access your settings.
4. Go to the Accounts tab and select the account to configure.
5. In General Settings, set the following:
Account Active to Yes.
Account Name: Any name to identify this specific user.
SIP Server field with your SIP server IP address or FQDN.
Secondary SIP Server with your secondary SIP server IP address or FQDN. Leave empty if not available.
SIP User ID: User account information, provided by VoIP service provider (ITSP). Usually in the form of a digit similar
to a phone number or actually a phone number.
Authenticate ID: SIP service subscriber authenticate ID used for authentication. Can be identical to or different from
the SIP User ID.
Authenticate Password: SIP service subscriber’s account password to register to the SIP server of ITSP. For security
reasons, the password field will be shown as empty.
Outbound Proxy with your outbound proxy IP address or FQDN. Leave empty if not available.
To Next Page
Loading...
