2. Choose the line and enter the number you want to transfer the call to, then pressthe “New Call”, the initial call will be put
on hold
3. Once the second call is established, Press the “Transfer” key to complete the transfer.
Attended Transfer
4. The user can “swap” between the calls, to swap between the current call and the call put on hold Click on Options →
Swap
Speed Dial
Speed dial allows users to perform single-digit dialing to predefined numbers. This feature is particularly useful to speed up
dialing frequently used or hard-to-remember numbers. A maximum of 10 speed dial numbers is allowed. For example, the
digit key 2 is configured as a speed dial key and assigned the number 2001, the phone will dial out the number 2001 directly
when you long press digit key 2.
To configure the speed dial (create, edit, or delete) numbers, proceed as the following steps:
1. Press Menu to bring up the operation menu and use arrow keys to reach Settings 🡪 Basic Settings🡪 Key Customization
2. You have then the option to choose under which category of programmable keys you want to define the Speed Dial key,
in our case we will choose the Multi-purpose key
3. Select the mode to Speed Dial
4. Select the associated account and the number to be dialed.
5. Press the “Save” softkey to save the configured speed dial numbers.
6. Once the Multi-purpose key is pressed , the speed dial will be initiated
Note
The speed dial number should not be set on a chosen representative number, otherwise long press will initiate a call to
configured speed dial number.
To Next Page
Loading...
