Web UI Access Level Management
There are two default passwords for the login page:
Web UI Access Level
Changing User Level Password
1. Access the Web GUI of your phone using the admin’s username and password.
2. Press Login to access your settings.
3. Go to System Settings
🡪
User Info Management.
4. Locate User Password section:
Type in your new user password in the New Password field.
Type in again same entered password in the Confirm Password field.
5. Press the Save button to save your new settings.
Changing User Level Password
Changing Admin Level Password
1. Access the Web GUI of your WP8x6 using the admin’s username and password. (Default username and password is
admin/Random Password from the sticker on the back of the unit).
2. Press Login to access your settings.
3. Go to System Settings
🡪
User Info Management.
User Level User Name Password Web Pages Allowed
End User Level user 123
Only Status, Phone Settings, System Settings, Maintenance and
System Application with limited options.
Administrator
Level
admin
Random password generated
after entering a numbers
combination on the keypad
All pages
Note
DO NOT USE the same password for both user and admin accounts.
To Next Page
Loading...
