4. Locate Admin Password section:
1. Type in the admin password in the Current Password field
2. Type in your new admin password in the New Password field.
3. Type in again same entered password in the Confirm Password field.
5. Press the Save button to save your new settings.
Admin Level Password
Changing HTTP/HTTPS Web Access Port
1. Access the Web GUI of your handset using the admin’s username and password. (Default username and password are
admin/random password from the sticker on the back of the unit.).
2. Press Login to access your settings.
3. Go to Security Settings 🡪 Web/SSH Access
4. In Web Access Mode, select the access method depending on the desired protocol (HTTP, HTTPS, or Both)
5. Locate HTTP / HTTPS Web Port field and change it to your desired/new HTTP / HTTPS port.
Note: By default, the HTTP port is 80 and HTTPS is 443.
6. Press Save button to save your new settings.
Important
DO NOT USE the same password for both user and admin accounts.
Note
After modifying the connection method or port, the web GUI will be automatically logged out and redirected to the new
address.
To Next Page
Loading...
