Earpiece mode:
Press the Dial Key to pick up the call, or the “Answer” softkey (left softkey).
Speakerphone mode:
Press the Speaker Key to pick up the call in speaker mode.
Headset mode:
Press Dial Key to pick up the call, or “answer” softkey (left softkey) using a connected headset.
Auto Answer
Users can enable the Auto Answer feature to accept and automatically answer incoming calls.
If enabled, the WP8x6 will automatically answer incoming calls using speaker mode.
To activate/deactivate the auto answer feature:
Using LCD Menu
1. Press Menu to bring up the operation menu.
2. Use arrow keys to reach Settings 🡪 Call Settings🡪Account x
3. Select which account will be enabling the Auto answer feature.
4. Set “Auto-Answer” to “Enabled” to configure the auto-answer mode and press the “On-hook ” button to save the
changes
Auto-answer
Using Web Interface
1. Access Web GUI Interface.
2. Navigate to Accounts
🡪
Call Settings.
3. Set “Auto Answer” to “Yes”. (By default, set to “No”).
Notes
To answer an incoming call during an established call, press the Dial Key, the Speaker Key, or the “Answer” softkey. The
incoming call is answered, and the original call is placed on hold.
When a missed call notification is registered on the WP8x6, users can redial the caller’s number directly from the phone’s
main screen by pressing the Dial Key. If there are multiple missed calls from different numbers, users can use the
navigation keys to select the desired number before pressing the Dial Key.
Note
Once the auto-answer call feature is enabled, an icon implying that will be displayed next to the extension number on the main
phone screen
To Next Page
Loading...
