Play Voice Mail Messages
1. Press Menu to bring up the operation menu.
2. Use arrow keys to reach the Voicemail tab.
3. Choose the account, press the “Select” button, and enter your Voicemail password then you can select visually and
retrieve your voice messages saved on your voicemail and listen to each voicemail.
Note: this feature is compatible with UCM6xxx on v.1.0.20.6 or higher.
Playing Voicemail Messages
CONTACTS
Users can manage local contacts by adding, deleting, and modifying every single contact. Users could access contacts under
the handset Menu. Please, refer to the following screenshots:
Accessing Contacts
There are three different types of phonebooks under the contacts page:
Local Phonebook:
This list contains all the contacts stored directly on the WP8x6 device. These are the contacts that have been manually added
or imported to the phone.
LDAP Phonebook:
Notes
If the VM is protected by a password, users can enter the password using the handset keypad after reaching the Voice Mail
system. The password is defined on the service provider or IP-PBX side.
When having unread voicemails on the handset, once accessing the dialing interface a stutter tone will be heard to notify
users about voicemails that need to be read.
Users can enable/disable voicemail pop-up messages on the LCD screen from the Web UI. (Phone Settings
🡪
Call
Settings
🡪
Others
🡪
Voicemail
🡪
Enable Voicemail Popup )
To Next Page
Loading...
