UCM Conference Room Call put on
Hold
Voice Mail
The voice mail feature ensures that you will never miss any important messages. It permits either to leave voice mails to
someone else or receive and listen to voice mails via the handset
Set Voice Mail ID
There are 2 ways to set Voice Mail Feature Code, either using the Handset Menu or Web Interface.
Note: The Voice Mail Feature Code depends on the service provider or IP-PBX used. For example, if UCM6xxx is the SIP server,
the Voice Mail Feature Code is *97.
Using LCD Menu
1. Press Menu to bring up the operation menu.
2. Use arrow keys to reach the Settings tab, then Go to Account settings
3. Select the desired account and configure the Voicemail ID number, then press “Save” softkey.
LCD Menu – Voice Mail ID
Using Web Interface
1. Access Web GUI Interface.
2. Go to Accounts
🡪
Account x
🡪
General Settings
3. Configure Voice Mail Access Number.
Web UI – Voice Mail Access Number
To Next Page
Loading...
