Push Button Alarm Overridden by
No Movement Alarm
Alarm Monitoring
Ambient Sound Detection
Ambient Sound Detection is used to identify sound levels and can trigger an alarm if a configured threshold is exceeded.
There are two methods of ambient-sound detection:
Instantaneous Detection: the alarm is triggered immediately when the sound level exceeds the detection threshold.
This method is typically used when quick action is needed.
Continuous Detection (3s): The alarm is triggered only if the ambient sound exceeds the threshold continuously for 3
seconds. This method is useful for avoiding false alarms.
The three levels of ambient sound are:
Ambient Sound Levels
To configure ambient-sound detection, please follow the steps below:
1. Quickly press the side key to access the alarm settings (if the side key is configured as “alarm”), or go to
Settings→Advanced Settings→Alarm Settings.
2. Select Alarm Monitoring and choose the Ambient Sound Detection method.
3. Set the Ambient Sound Level and click on the left Softkey (OK) to confirm the changes.
4. Once the sound threshold is reached, the warning will be triggered as shown the following figure.
To Next Page
Loading...
