Dialing from Phonebook
Users may use their contacts list to initiate calls.
1. Press Menu to bring up the operation menu and use arrow keys to reach Contacts
2. Select the contact to call and press the Dial Key to initiate the call.
Dialing from the Contacts List
Direct IP Call
Direct IP Call allows two phones to talk to each other in an ad-hoc fashion without a SIP server. VoIP calls can be made
between two phones if:
Both phones have public IP addresses; or
Both phones are on the same LAN/VPN using private or public IP addresses; or
Both phones can be connected through a router using public or private IP addresses (with necessary port forwarding or
DMZ).
To make a direct IP call, dial the IP address of the target. Following the below syntax (Example target IP is 192.168.1.10):
– Dialing 192*168*1*10 (to use 5060 port by default)
– Users can specify the port number as follows 192*168*1*10#5060.
Answering Calls
When receiving an incoming call, you can answer the call using the following steps:
Note
In step 3, users can press the “Options” softkey followed by the “Edit&Dial” option to edit the number before initiating the call.
The call history list stores the last dialed phone numbers. When the memory of the redial number list is full, the handset will
automatically erase the oldest dialed number when a new number is dialed.
Notes
To receive an IP call, user need to disable using a random port, under Web GUI
🡺
Phone settings
🡺
General Settings:
Set “Use Random Port” to No.
In order to make an IP call, set “Key as Send” under Account x
🡺
Call Settings to “Disabled“, as the pound (#) and star
key (*) will be used to dial IP addresses.
Users can customize the ringtone for direct IP calls by selecting one of the available tones under Phone Settings
🡺
Call
Settings
🡺
Incoming.
To Next Page
Loading...
