System Info Description
CPE Status
To view the CPE status, follow these steps:
1. Press the Menu key to bring up the operation menu.
2. Use arrow keys to reach the Status menu and navigate to CPE Status.
CPE Status View
The following information will be displayed:
Hardware
H/W Displays the hardware version of the phone
P/N Displays the Part Number.
S/N Displays the Serial Number
MAC Address Displays the MAC Address of the phone.
System Version
Displays the different kind so of software versions installed based on the mode:
1. Boot
2. Core
3. Prog: this is the main phone software version
4. Locale
Time Includes information such as the system time and system timezone
IP Geographic Information
Displays information about the phone Geographic Information, this includes : the city,
language, and recommended timezone
Item Description
CPE link
CPE link refers to the connection between the customer premises equipment (CPE) and the
network, detailing its status and performance.
CPE STUN
indicates the status of the Session Traversal Utilities for NAT (STUN) functionality on the
Customer Premises Equipment, used for NAT traversal and connectivity checks in VoIP and
other real-time communication protocols.
UDP CR
indicates the status of control and reporting mechanisms related to UDP (User Datagram
Protocol) traffic on the Customer Premises Equipment
To Next Page
Loading...
