Configuring Man Down Alarm
Running Alarm
Running Alarm triggers an alert when the user is moving at a speed that indicates running. This feature can be particularly
useful in situations where running may signal an emergency.
Users must set a detection sensitivity level from 1 to 7, where Level 1 is the lowest and Level 7 is the highest, and configure
the Running Timeout (in seconds).
The steps below illustrate how to configure this alarm:
1. Quickly press the side key to access the alarm settings (if the side key is configured as “alarm”), or go to
Settings→Advanced Settings→Alarm Settings.
2. Select Alarm Monitoring and set the Running Alarm level.
3. Choose the Man Down Timeout from 5 to 300 seconds.
4. To trigger the warning, running motion must be detected for the timeout duration.
To Next Page
Loading...
