Special Precautions: Attaching a Cutter Pen
12
3 Once the pen has been prop-
erly mounted, tighten the
screw.
CAUTION: The pen has two flanges
and must be fully seated
(the pen holder is engaged
on the second flange)
before tighten the screw.
CAUTION: The cutter must be prop-
erly seated (the pen holder
is engaged on the flange)
before tighten the screw.
Flange
Bracket to hold pen
Upper groove
Flange
Bracket to hold pen
Flange
Bracket to hold pen
To Next Page
Loading...