Cutters and Holders: Replacing the Cutter Blade
29
Cutter Offset
Value Settings
Replacing Super-
steel Blades
For the PHP32-
CB09(N) & PHP32-
CB15(N):
1 Turn the plunger cap
counterclockwise.
2 Remove the plunger
cap.
3 Remove the blade
and spring from the
plunger cap.
4 Stand the cap
upright.
5 Insert the new blade
and spring into the
hole.
6 Reattach cap to the plunger.
Cutter pen
Color
classification
Compatible
blade types
Blade
Material
Cutter offset
values
PHP32-CB09N Blue CB09UA Supersteel 18 + 2
PHP32-CB15N Red CB15U
CB15U-K30
CB15UB
Supersteel
Supersteel
Supersteel
28 +
2
28 +
2
5 + 5
PHP31-CB15 Red CB15-10C
CB15-05S
Ceramic
Sapphire
18 +
2
9 + 2
CAUTION: The pen has two flanges
and must be fully seated
(the pen holder is engaged
on the second flange)
before tighten the screw.
Upper groove
Flange
Bracket to hold pen
To Next Page
Loading...