Advanced Functions and Settings: AXIS ALIGNMENT - Axis Alignment Parameter Setting
89
The Axis Alignment menu appears:
• Press the POSITION key to move the light pointer or the loupe to Axis Point 1.
• Press the ENTER key to store the setting. The following menu appears:
• Press the POSITION key to move the light pointer or the loupe to Axis Point 2.
• Press the ENTER key to store the setting.
If you select the two-point method, the Axis Origin Point menu appears. If you
select the three-point method, Axis Point 3 menu appears.
• Press the POSITION key to move the light pointer or the loupe to Axis Point 3.
• Press the ENTER key to store the setting.
The following menu appears:
If the distance between point 1 and point 2 is unknown, press the ENTER key to
skip to the next step.
If the distance between point 1 and point 2 is a known value, use the POSITION
key to change the distance value to that of the printed image, i.e., the distance
AXIS POINT 1
.
X= ...0 mm
Y= ...0 mm
AXIS POINT 1
.
X= +...0 mm
Y= +...0 mm
AXIS POINT 2
.
X= +...410 mm
Y= +.....9 mm
AXIS POINT 3
.
X= +.....9 mm
Y= +...408 mm
DISTANCE
POINT 1-2
00399.6 mm.
OK?.......... 00400.0 mm.
To Next Page
Loading...