FC8600-UM-251-9370 2-7
2 PARTS NAMES and FUNCTIONS
(2) Insert 2 basket tubes (short) into the mount from the side without the cap� Assemble 2 sets as shown
below�
Cap
Mount
Basket tube (short)
(3) Connect the basket tubes (short) to the joints inserted on the basket tubes (long) at the end of the
basket attached in step 1�
Mounting position of the center basket pipe (long) depends on the loading direction�
Basket tube (long)
Cloth basket
Joint
For front
loading
For rear
loading
(4) Fix the part assembled in 3 to the stand using the socket head cap screws� Assembly is completed by
separating basket to front and back of the center bar�
Socket head
cap screw
Socke thead
cap screw
Center bar
Stand
To Next Page
Loading...
