GRAPHTEC FC8600-160 - How to Replace the Front Media Sensor

FC8600-UM-251-9370 6-10
6 DISASSEMBLY AND REASSEMBLY
6.2.2 How to Replace the Front Media Sensor
How to detach the front media sensor
(1) Detach the front writing panel (see Subsection 6.1.8).
(2) Remove the M3L6 binding head screw attaching the front media sensor bracket.
Front media sensor bracket
M3L6 binding head screw
Front media sensor
(3) Remove the M3L10 binding head screw attaching the front media sensor.
M3L10 binding head screw
(4) Disconnect the sensor from the connector.
How to reinstall the front media sensor
(1) Reattach the front media sensor in the reverse order in which it was detached.