GRAPHTEC FC8600-160 - Reading the Screen (LCD)

FC8600-UM-251-9370 3-3
3 OPERATIONS
3.2 Reading the Screen (LCD)
Information reecting the status will be displayed in the screen of the control panel.
Name of the button and corresponding function is displayed on the screen when a function is allocated to the
button on the control panel. Button name will be displayed in reverse when the button is enabled.
Following items are displayed in the default screen.
Tool condition currently using
Corresponding button name of control panel
Set condition of media
(READY status: It will display "READY" when the media is loaded)
Display of setting condition
Command: HP-GL/GP-GL
Step size: 0.1 mm/50 µm/25 µm/10 µm
Rotate/mirror: Rotate 90 degrees/mirror
Priority: Manual priority/program priority
Sort: Display when sort is on
Prefeed: Display when automatic media feed is on
Media set lever raised
Media set lever lowered
Display of Default Screen
(Valid button is displayed in reverse)
Screen to set the corresponding conditions is displayed when the [MENU] key or [CONDITION] key are
pressed.
MENU CONDITION
MENU screen CONDITION screen
It will return to default
screen when [MENU]
key is pressed while
displaying MENU
screen.
It will return to
default screen when
[CONDITION] key is
pressed while displaying
CONDITION screen.
MENU screen displayed by button operation
Page number is displayed in the upper right corner of the screen if there are too many settings or selection
that will need multiple pages to display.
Press the position (pq) key to move different page.
POSITION(t) key
[4] key
Page number
Page number
POSITION(
??
) key
Example of moving page and operation button