FC8600-UM-251-9370 7-1
7 ADJUSTMENT
7 ADJUSTMENTS
7.1 List of Items Requiring Readjustment
If you replaced any of the units listed in the table below or altered their sensor positions, be sure to readjust
the corresponding items.
Unit name
Item
Main board
Light
pointer
Pen block
Pinch roller
sensor
X,Y motor Drive roller
X,Y Motor
drive belt
Auto
registration
mark
sensor
NOV-RAM clear M
Pen force adjustment M M
Distance adjustment M M M
Auto registration mark sensor
adjustment
N N N M
Light pointer adjustment N M N
Firmware upgrade M
Belt tension adjustment M M M
Pinch roller pressure adjustment M
2-Pen option adjustment N N
DIP switch setting N
Servo gain adjustment N N
No mark: Unnecessary M: Must always be adjusted N: To be adjusted as necessary
Note: Themainboardmusthavethelatestversionofrmwareunlessotherwisespecied.
To Next Page
Loading...
