GRAPHTEC FC8600-160 - How to Replace the Front Guide

FC8600-UM-251-9370 6-5
6 DISASSEMBLY AND REASSEMBLY
6.1.5 How to Replace the Front Guide
How to detach the front guide
(1) Remove the four M3L6 binding head screws from the front guide for the FC8600-60/75.
(Remove the ve M3L6 binding head screws from the front guide for the FC8600-100.
Remove the six M3L6 binding head screws from the front guide for the FC8600-130.
Remove the seven M3L6 binding head screws from the front guide for the FC8600-160.)
(2) Detach the front guide.
Front guide
M3L6 binding head screw
How to reinstall the front guide
(1) Reattach the front guide in the reverse order in which it was detached.