FC8600-UM-251-9370 I
HISTORY OF REVISIONS
No. Date issued Description of revision Page Edition
1 13.2.22 First Printing All 01
2 14.6.18
The rank of items 10 and 15, 16 were changed to A rank.
9-8 02
3 14.6.18 Parts name was corrected for item number 35. 9 -11 02
4 14.6.18 The rank of Pinch Roller Base was changed to B rank. 9-10 02
5 14.6.18 Parts number of Drive Pulley Assy was corrected. 9 -11 02
6 14.6.18 The rank of I/F Panel LAN was changed to D rank. 9-1 02
7 14.6.18 Parts number of End Cap was added. 9-15 02
8 14.6.18 The rank of Cam Shaft was changed to C rank. 9-10 02
9 14.7. 2 3 Parts number of Drive Pulley Assy was corrected. 9-10 03
10 14.8.27 Parts number of Center Covers were corrected. 9-1 04
11 14.8.27
Quantity of Push Roller Positioning Label S for the FC8600-60 and FC8600-75 were corrected.
9-14 04
12 14.8.27
The rank of labels were changed to C rank except I/F labels.
9-14 04
13 14.11.18 Parts number for LED Base was added. 9-4 05
14 14.11.18
The construction of Pen Block Assembly was corrected.
9-5 05
15 15.02.24 Parts number for Fan was
corrected.
9-1 05
16 15.04.28
Item number of Paper Hold down A and B were corrected.
9-6 05
17 15.05.21 The procedure of distance adjustment was corrected. 7-22 to 7-24 05
18 15.08.04 The procedure of distance adjustment was corrected. 7-23 to 7-24 06
19 15.10.20
The procedure of the Tool 2 and the Cross Cutter Threshold adjustment was added.
7-40 to 7-41 07
To Next Page
Loading...
