GRASS VALLEY K2 - Page 44

This re-synchronizes SiteConfig regarding the current state of the device. If
software deployment tasks were waiting for the restart to occur, SiteConfig now
allows them to proceed.
Install required Windows update
Do not do this task if one of the following is true:
• A K2 Summit Production Client or K2 Solo Media Server installed new with K2
software version 7.1.x or higher, in which case the required Windows update version
2.0.50727.4022 is pre-installed.
• A K2 Summit Production Client or K2 Solo Media Server already upgraded to the
required Windows update version 2.0.50727.4022.
Do this task if:
• A K2 Summit Production Client or K2 Solo Media Server with Windows update
at a version lower than 2.0.50727.4022.
NOTE: Do not install general Windows updates as available from Microsoft. Update only
as directed by Grass Valley.
1. If you are not sure of the Windows update version currently installed, do the
following:
a) Navigate to C:\Windows\Microsoft.NET\Framework\v2.0.50727.
b) Check file properties. The following properties indicate that version
2.0.50727.4022 is already installed:
Platform
Time
Date
File sizeFile versionFile name
x86
04:56
11-Mar-2009989,000
2.0.50727.4022
mscordacwks.dll
x86
04:56
11-Mar-2009
4,550,6562.0.50727.4022
mscorlib.dll
x86
04:56
11-Mar-2009
5,812,5442.0.50727.4022
mscorwks.dll
x86
04:56
11-Mar-2009
388,936
2.0.50727.4022
sos.dll
c) If the update is necessary, continue with this procedure.
2. Access the upgrade files and double-click NDP20SP2-KB968760-x86.exe.
The installation wizard opens.
3. Work through the wizard, accepting all default settings, and finish.
4. Restart as prompted.
Lock K2 Summit Production Clients
This task enables the write filter on a K2 Summit Production Client or on a group of
K2 Summit Production Clients.
Prerequisites for this task are as follows:
44 K2 Version 7.2.7 Release Notes & Upgrade Instructions 12 May 2010
Upgrading K2 systems