1. Log in with a local administrator account. This is required to support K2 System
Software licensing.
NOTE: When installing K2 system software, you must be logged in with a
local administrator account. Do not install software using a domain account.
2. Disable the write filter, if not already disabled.
3. If installation files are on a connected external USB drive, copy the installation
files to the local drive before proceeding.
4. Access the installation files.
5. Locate and open the following file:
For K2 Summit Production Client or K2 Solo Media Server —
• If a message appears informing you that you must restart, click OK to restart.
If an external USB drive is currently connected, disconnect it before startup
processes begin. Then repeat previous steps as necessary to run the install
program again before continuing with the next step in this procedure.
• If no message appears, the install wizard opens. Continue with the next step in
this procedure.
6. Follow the install wizard onscreen instructions, and work through each page.
7. When you arrive at the Specify Target Type page, select the option as follows:
DescriptionOption
For installing on an internal storage K2 system or on a
direct-connect storage K2 system.
K2 with local storage
12 May 2010 K2 Version 7.2.7 Release Notes & Upgrade Instructions 73
Upgrading K2 systems
To Next Page
Loading...
