Gree GMV-S280W/A-X

GMV5 Home DC Inverter Multi VRF Units
250
13
Operating frequency of
compressor 3
Hz
25
Outdoor unit heating EXV1
(Actual value = displayed
value*10)
PLS
26
Outdoor unit heating EXV2
(Actual value = displayed
value*10)
PLS
27
Subcooler EXV
(Actual value = displayed
value*10)
PLS
28
Defrosting temperature
℃/℉
29
Liquid-extracting
temperature of subcooler
℃/℉
30
Outlet temperature of steam
separator
℃/℉
31
Oil returning temperature
℃/℉
32
Inlet-tube temperature of
condenser
℃/℉
33
Outlet-tube temperature of
condenser
℃/℉
A6
Cooling/heati
ng function of
the entire unit
nA:
cooling/heati
ng
nC: cooling
only
nH: heating
only
nF: air supply
Temperature area: displays parameter code
Timer area: displays setting value of cooling/heating function of the
current unit
nb
Barcode
inquiry of
hydro box
0~9，
A~Z，
a~z,-
Operating method (nb inquiry is not supported for the slave wired
controller)
Under the ―nb‖ status, timer area will display nothing. Press ―Mode‖
button to enter into barcode inquiry, the temperature area displays
―nb‖, and engineering number in timer area flickers. Press ―▲‖ and
―▲‖ button to switch engineering number of indoor unit.
Press ―Mode‖ button to select an indoor unit, then the temperature
area displays ―Un‖, timer area displays ―-n‖, press ―‖ and ―‖ buttons to
display barcode of indoor unit and barcode of controller of indoor
unit. Press ―Enter/Cancel‖ button to return to the upper level status,
the temperature area will display ―nb‖, and timer area will display the
engineering number of indoor unit to be inquired. Press
―Enter/Cancel‖ button again to return to the upper level.
Display mode:
Temperature area: nb/Un/Pc/Barcode.
Timer area: -n/engineering number/barcode