Gree GMV-S280W/A-X

GMV5 Home DC Inverter Multi VRF Units
80
(Actual value = Displayed
value*10)
27
Sub-cooler EXV
(Actual value = Displayed
value*10)
PLS
28
Defrosting temperature
℃/℉
29
Liquid-extracting
temperature of sub-cooler
℃/℉
30
Outlet tube temperature of
gas separator
℃/℉
31
Oil return temperature
℃/℉
32
Inlet tube temperature of
condenser
℃/℉
33
Outlet tube temperature of
condenser
℃/℉
A6
Unit cooling/
heating
function
nA: Cooling/
Heating
nC: Cooling
only
nH: Heating
only
nF: Fan (air
supply)
Temperature zone displays the parameter code.
Timer zone displays the cooling/heating function setting value of the
current unit.
nb
Barcode
query of
indoor unit
0~9, A~Z,
a~z,-
Operation method (nb query is not supported by slave wired
controller):
In ―nb‖ status, the timer zone is not displayed. Press ―MODE‖ button
to enter barcode query. The temperature zone displays ―nb‖ and the
project number in the timer zone blinks. Press ―▲‖ or ―▼‖ to switch
the project number of indoor unit.
Press ―MODE‖ button to select an indoor unit. The temperature zone
displays ―Un‖ and the timer zone displays ―-n‖. Press ―▲‖ or ―▼‖ to
display the barcode of the entire indoor unit and the barcode of indoor
unit controller. Press ―SWING/ENTER‖ button to return to the
upper-level menu. The temperature zone displays ―nb‖ and the timer
zone displays the project number of the queried indoor unit. Press
―SWING/ENTER‖ button again to return to the upper-level menu.
Display mode:
Temperature zone displays nb/Un/Pc/barcode.
Timer zone displays -n/project number/barcode.
The following is an example:
Example
Temperatur
e zone
Timer
zone
Remark
1
Remark2
Barcode of the
entire indoor
unit:
N1r012815006
6
Un
(displayed
on the right)
-n
(displaye
d in the
middle)
It
indicate
s that
the
followin
g is the
Press
―▼‖ to
display
downwar
d and
press